FAA contractor, router focus of investigation into air traffic halt

FAA contractor, router focus of investigation into air traffic halt.

EntertainmentNews Info Wire6 min read
FAA contractor, router focus of investigation into air traffic halt

FAA contractor, router focus of investigation into air traffic halt.

Article outline

  1. What happened
  2. Official response
  3. The key numbers
  4. What comes next
  5. Why it matters
  6. The bottom line

Key points

  • L3Harris manages the FAA Telecommunications Infrastructure, supporting regarding 45, 000 daily U.S.
  • FAA Administrator Bryan Bedford has remarked outdated telecom copper wires should be completely replaced by September 2027.
  • Could one single router have been the cause of the nationwide ground stop that halted more than 10, 000 flights?
  • The FAA is additionally moving to a cloud-based SMART (Strategic Management of Airspace, Routes, and Trajectories) system for managing air traffic.
  • According to Transportation Secretary Sean Duffy, FAA contractor was working to switch telecommunication lines, which led to the flight shutdown.

FAA contractor, router focus of investigation into air traffic halt. Mike Snider USA TODAY. Unclear if equipment or contractor error caused flight shutdown.

That's the culprit identified Nov. 14 by Transportation Secretary Sean Duffy. This person remarked aerospace and defense technology business L3Harris was conducting routine maintenance to switch telecommunication lines from old copper wire to fiber in at least one remote location.

Authorities informed Reuters that there may have been challenges with routers installed in both Arkansas and Texas.

In practice, the work involved replacing aging copper wire with fiber, a process that had been ongoing throughout the system over decades, Duffy remarked. The updated router starting flooding others on the air traffic control system, causing communication problems and disruption in radar feeds, he stated.

Consequently, the FAA issued a nationwide five-hour ground stop that led to the cancellation of almost 10, 000 flights and delays of more than 7, 000 others in one of the nation's worst-ever travel disruptions.

Meanwhile, the ground stop was lifted at around 8: 15 p.m. Friday. "We are back at full operations, " Duffy remarked Saturday.

Nevertheless, office-holders and experts cautioned that disruptions caused by the stoppage could linger for days.

Authorities are still working to determine whether the challenge was due to an error in the installation or a faulty router, Duffy noted.

For context, the router work was being done by contractor L3Harris Technologies. It is headquartered in Melbourne, Florida, Duffy remarked.

L3Harris manages the FAA Telecommunications Infrastructure, supporting regarding 45, 000 daily U.S. Flights and connecting more than 4, 400 facilities, according to the company's website.

Among its tasks: converting decades-old copper wire connections with modern high-speed networks.

"L3Harris has been modernizing the communications infrastructure supporting the National Airspace System in close coordination with the FAA. With safety and reliability as our highest priorities, L3Harris, together with its telco partners and the FAA, has completed more than 70% of the planned airspace communications conversion from legacy copper wires to a fiber optic system, " the firm stated in an official note Saturday, Nov. 14.

"We are supporting the FAA in its investigation to understand the conditions that led to the Nov. 13 ground stop of our nation's air travel. L3Harris takes the nationwide ground stop and its impact on travelers, airlines and air traffic operations seriously."

L3Harris Technologies, a Melbourne, Florida-based aerospace and defense technology firm, was created in June 2019 by the $43 billion merger of the space and aviation business Harris Corporation and military and homeland security communications tech provider L3 Technologies, CNBC documented.

Meanwhile, the merger created the nation's sixth-largest defense tech firm, behind Raytheon, Washington Technology documented at the time.

Friday's replacement of copper to fiber was being handled by L3Harris at an as-yet-unnamed FAA remote location, Duffy remarked. "We're working to determine whether we had incompetence, meaning was it user error or installer error from L3Harris, or did they install a faulty router? We haven't determined what the fault was, " he remarked.The problem led to data overloading other communications centers.

"We had over 1, 000 connection attempts every four to five seconds, and what that did was gave us issues with our communication with airplanes, and it also caused some disruption with our radar, " Duffy continued.

"We were able to deploy fixes to reduce the overloading on our switches, that we're able to bring the networks back online and our (air traffic control facilities) and our centers back online, " he remarked.

Duffy described the difficulty as involving "legacy network" equipment, maintenance on which continues as the FAA is in the midst of an air traffic control modernization program. "By the way, all of the new equipment that we put in, none of that went down. This is all old legacy equipment that's existed forever, " he remarked.

"We need L3Harris or whoever provided that router to us to do a better job, " Duffy remarked, noting that "virtually every single institution in America has gone from copper to fiber, from analog to digital."

As it relies on outdated telecom systems, including decades-old Compaq computers and replacement parts purchased on eBay, Reuters noted, the nation's aging air traffic control system has been a hindrance for years. FAA Administrator Bryan Bedford has remarked outdated telecom copper wires should be completely replaced by September 2027.

Congress approved $12.5 billion to modernize air traffic control systems in 2025, but in September, Duffy asked for an extra $30 billion to complete upgrades and fix facilities.

He upped that request Friday to $50 billion in funding to upgrade air traffic control systems. "This is an emergency, " ⁠he remarked.

Meanwhile, the FAA remarked it was doing further testing with L3Harris to see if there are any extra risks, Reuters noted.

Meanwhile, the FAA is additionally moving to a cloud-based SMART (Strategic Management of Airspace, Routes, and Trajectories) system for managing air traffic. Coincidentally, the FAA remarked on Friday it was expanding the SMART system throughout the United States after its initial rollout in the National Capital Region in September.

Air Space Intelligence, the firm behind the FAA's SMART airspace planning system, denied that its technology had any affect on Friday's nationwide ground stop. This story has been updated to add new information.

Contributing: N'dea Yancey-Bragg, Joey Garrison, Sarah D. Wire, Josh Rivera and Zac Anderson.

Mike Snider is a national trending news reporter for USA TODAY. You can follow him on Threads (mikegsnider), Bluesky (@mikegsnider.bsky.social), X (@mikesnider) and email him [email protected]. SMS Facebook Twitter Email. Share your feedback to support improve our site! Share your feedback to support improve our site!

Taken together, the developments around FAA contractor, router focus of investigation into air traffic halt point to a situation that is still moving, and the coming days should bring more clarity.

Leave a Reply

Your email address will not be published. Required fields are marked *